Bilateral radicular cyst with severe destruction of the buccal cortical plate secondary to endodontic failure

Abstract Large apical radiolucencies after endodontic treatment are usually advised orthograde retreatment, apical surgery and that too with a guarded prognosis. Microsurgical techniques, the use of ultrasonic and magnification aides, have been in use in the developed countries for the past few decades and have shown significant improvement in long-term success of such cases. MTA is proposed as one of the best materials for sealing root end surfaces. In this report, the healing response of cases of 2 large apical radiolucencies, found separately in the anterior maxilla, which were treated by orthograde as well as retrograde endodontic treatments and guided tissue regeneration techniques

Evaluation of the nasopalatine canal (NPC) in a subset of Pakistani population, using cone beam computed tomography (CBCT)

Objective: To evaluate variations in the shape, diameter, length and width of the nasopalatine canal along with the width of the buccal cortical bone anterior to it, using cone beam computed tomography imaging. Methods: The retrospective, cross-sectional study was conducted at the Aga Khan University Hospital, Karachi, from September to October 2020, and comprised pre-existing cone beam computed tomography scans taken between 2015 and 2020 of patients of either gender aged 18-60 years who had maxillary central incisors present. The shapes and dimensions of the nasopalatine canal were observed along with the buccal bone anterior to the nasopalatine canal. Data was compared with respect to age and gender. Data was analysed using SPSS 23. Results: Of the 90 scans evaluated, 46(51.1%) belonged to females with a mean age of 37.85±18.19 years, and 44(48.9%) belonged to males with a mean age of 38.07±13.58 years. The mean length and width of the nasopalatine canal was 11.28±1.90mm and 2.62±0.91mm, respectively. The nasopalatine canal was significantly longer (p\u3c0.01) and wider (p=0.02) in males than females. The mean diameter of foramen of Stenson was 2.99±1.17mm and incisive foramen was 6.09±1.80mm. The mean width of the buccal cortical bone at the most coronal, middle and most incisal levels was 7.20±1.70mm, 6.12±1.31mm and 6.12±1.31mm, respectively. Buccal bone width was wider in males than females, but the difference was significant only at the midpoint (p\u3c0.05). Conclusion: There was a significant difference in the dimensions of the width and length of the NPC with respect to gender. No significant differences were observed with respect to ag

Conventional and contemporary approaches of splinting traumatized teeth: A review article

Trauma moves a tooth from its original position which needs to be repositioned for optimum healing and better outcomes. To stabilize the traumatically displaced teeth, splinting is specified as the gold standard. In this article we have discussed about various old and modern techniques based on the type of material to splint teeth with dentoalveolar trauma. As per recommendation of IADT, providing flexible splint is beneficial for good healing. A biologically favourable splint should not just be user friendly but also should be convenient in terms of removal. Every technique has its merits and demerits. Iatrogenic trauma to the teeth due to forceful removal of material should be avoided as it may result in post-operative sensitivity but sometimes it is inevitable. Metallic or wire based splints either secured with ligature wire or resin based material may show directly or through the cemented material and compromise aesthetics. This worsens the physiological impact which the patient is already facing after trauma. Recent advancement in splinting material with fiber reinforced material has brought a dramatic change in terms of strength and aesthetics, specifically after traumatic dental injuries. There are various other techniques discussed here which can be used for splinting teeth when the dentist has limited time in emergency or limited resources. The type and timing of the splinting span should be in accordance with the type of injury and as per IADT recommendation to follow standard of care

A CBCT based evaluation of root proximity of maxillary posterior teeth to sinus floor in a subset of Pakistani population

Objective: To evaluate the vertical relationship of the roots of maxillary posterior teeth with maxillary sinus floor, and its association with age, gender and bilateral jaw symmetry.Methods: The cross-sectional study was conducted at a tertiary care hospital in Karachi from June to December 2018, and comprised patients who visited the dental clinics and underwent cone-beam computed tomography scans. The scans were evaluated in the axial, coronal and sagittal planes and roots were classified using Jungs classification for proximity to maxillary sinus floor. The distance between the sinus floor and the apices of maxillary posterior teeth was measured. Data was analysed using SPSS 23.Results: There were 60 scans with 1066 roots. The most common maxillary tooth root in Type III group of Jung classification was the mesio-buccal root of the 2nd molar with the shortest mean distance of 0.44±3.05mm, followed by palatal roots of the 1st molar with the shortest mean distance of 1.58±4.01mm. The maxillary tooth root most frequent in Type I group was buccal root of 1st premolar with a mean distance of 8.15±6.65mm, and the 2nd premolar with a mean distance of 7.38±6.60mm. No significant difference was found in terms of gender and sides (p ≥0.05).Conclusions: The most common tooth root protruding in the sinus was found to be the mesio-buccal root of the 2nd molar, followed by palatal roots of the 1st molar. The most distant maxillary tooth root from the sinus was the buccal root of 1st and 2nd premolars

Prosthetic rehabilitation of edentulous mandible with two-implant retained fixed hybrid prosthesis: A case report

Removable complete dentures have been the most costeffective treatment option for edentulous jaws since decades. However, certain problems are encountered by the patients such as stability of the lower dentures resulting in poor masticatory efficiency. Ridge resorption and inadequate bony support are the long-term complications comprising the stability of the denture and patient finding it difficult to control denture movement during speaking and eating reducing patient compliance. Mandibular implant retained over dentures or hybrid dentures have shown to be better alternatives in terms of retention, stability and patient satisfaction. Two implants provide cost-effective, stabilized and comfortable treatment options. The present case report discusses the management of the patient with compromised dentition in which all teeth were extracted followed by conventional upper complete denture and lower two implant supported fixed hybrid dentures with splinted bar attachmen

Evaluation of root morphology and canal configuration of maxillary premolars in a sample of Pakistani population by using cone beam computed tomography

Objectives: To evaluate the root canal morphology of maxillary premolars. Method: This retrospective study was conducted from November 2016 to January 2017 at Aga Khan University Hospital, Karachi, and reviewed Cone Beam Computed Tomography images of maxillary first and second premolars done from November 2014 to October 2016. Frequency distribution of Vertucci\u27s classification was determined. Chi square test was applied to determine any association between Vertucci\u27s type and gender. SPSS 19 was used for data analysis. Results: Of the 114 first premolars, 74(68.6%) were bi-rooted and 36(31.5%) were single-rooted. The mean lengths of buccal and palatal roots were 20.6 ±1.7mm and 19.5±2.0 mm, respectively. The most common canal morphology reported for maxillary first premolars was type I 127(68%) followed by type II 24(12.9%). Of the 115 maxillary second premolars, 97(84%) were single-rooted. The mean lengths of buccal and palatal root were 20.7±1.6mm and 19.0±1.45mm, respectively. The most common canal morphology reported for second premolars was type I 71(53.4%) followed by type II 18(13.5%). Conclusion: Vertucci\u27s type I was the most common canal configuration for maxillary first and second premolars and there was no gender-based difference for root canal morphology of maxillary premolar

Comparison of antimicrobial efficacy of calcipex and metapex in endodontic treatment of chronic apical periodontitis: A randomised controlled trial study protocol

Introduction: Various intracanal medicaments have been used in cases of chronic apical periodontitis for appropriate disinfection of the root canal system to eliminate microbes especially from the inaccessible areas. Calcium hydroxide is the most common intracanal medicament available in various forms, but its effectiveness with or without iodoform using microbial culture is unknown. Therefore, our aim is to compare the antimicrobial efficacy of Calcipex and Metapex in endodontic treatment of teeth presenting with chronic apical periodontitis by assessing the bacterial load reduction.Method and analysis: 60 single rooted teeth of patients with diagnosis of chronic apical periodontitis will be selected and the canals debrided chemomechanically. The patients will be randomised into two groups: Calcipex and Metapex. The first sample (S1) for bacterial culture will be taken before placement of intracanal medicament and the second sample (S2) will be taken after 7 days, before final obturation from the canal and sent to lab for culture. Colony-forming unit will be evaluated. Paired t-test will be used to assess difference between antimicrobial efficacies within the group of medicaments. Independent sample t-test will be used to assess antimicrobial efficacies between groups. Level of significance will be kept at 0.05.Ethics and dissemination: Approval from Aga Khan University Hospital Ethical review committee is taken. Findings will be reported according to the Standard Protocol Items for Randomised Trials guidelines. Research findings will be disseminated through annual reports, peer-reviewed journals and conferences.Trial registration number: NCT04336709

Augmented reality in clinical dental training and education

Dentistry is a profession that requires coordinated motor skills in addition to acquired knowledge for ideal execution of any treatment plan for patients. Learning experiences have been modified over a period of time for students as well as for the healthcare providers. Conventional pre-clinical training employed the use of cadavers, but financial, ethical and supervisory constraints have become a major shortcoming. With the adaptation of technology in dentistry, pre-clinical training has now employed simulation. It provides the opportunity for students to develop psychomotor skills for procedures by practising pre-clinical, standardised learning competencies before they engage in patient-management. Simulation involves computer-aided learning, augmented reality and virtual reality, which are largely taking over pre-clinical teaching. Augmented reality is commonly being employed in maxillofacial, restorative, tooth morphology learning and mastering technique for administering local anaesthesia in dentistry. Virtual reality is being employed particularly in pre-treatment implant planning and dental education for students. Use of haptic technology, like robotics, is also gaining popularity, and facilitates a two-way communication between the user and the environment to better simulate the clinical setting for learning purposes

Assessment of contamination on sterilised dental burs after being subjected to various pre-cleaning methods

OBJECTIVE: To determine the effectiveness of different pre-cleaning methods by determining frequency and site of contamination on the sterilised dental burs using Phloxine B dye. METHODS: The in-vitro experimental study was conducted from June to August 2017 at dental clinics of Aga Khan University Hospital Karachi. Diamond dental burs were selected and divided into two control and four test groups. The two control groups were classified as Negative (new burs) and Positive (used contaminated). The four test groups were classified as Manual (Group-1), Ultrasonic (Group-2), Manual + Enzyme (Group-3) and Manual + Ultrasonic (Group-4). Phloxine B dye was used to determine the contamination. The images of the burs were taken and enlarged at 15X before subjected to visual assessment. Association between contamination and pre-cleaning methods were determined. Data was analysed using SPSS version 22. RESULTS: A total of 210 burs were selected for the study which were divided in 6 groups of 35(16.66%) each. One (2.8%) bur in negative control group and all burs in positive control group showed contamination. In test groups, 27(77.1%), 29(82.8%), 27(77.1%) and 24(68.5%) burs showed contamination in groups 1, 2, 3 and 4, respectively. There was no association between type of pre-cleaning method with the frequency of contamination (p =0.57). The head of bur was the most frequently contaminated site (p \u3c 0.003). CONCLUSIONS: None of the pre-cleaning method was found to be effective. Head of bur was the most frequently contaminated site

Inculcating research curriculum in operative dentistry - endodontics residency programme: Experience and outcomes

Incorporating research education and training in residency curriculum increases the understanding of evidence-based decision-making among doctors in training. Evidence suggests that the addition of research is linearly associated with improvement in clinical competence, and encourages the residents to shape their career as clinical investigators. The current paper was planned to share the experience of adding research into the core curriculum of Operative Dentistry-Endodontics residency programme at a tertiary care university hospital, and to evaluate the outcome achieved with that change